Liftmaster TECHNA- 12' LED CBG Aluminum Arm

This is a 12-foot modular barrier gate arm package that combines an aluminum arm with an integrated LED strip to add visibility to the arm. The LED strip features red and green lights and inserts into the arm's channel facing oncoming traffic. It is designed for use with barrier gate arms in the BG24DC barrier gate operator series, with this 12' configuration corresponding to the BGARM12.

The LED strip slides into the arm channel and is secured with plastic retainer clips, then connects to the mating connector on the arm bracket wire harness. Excess LED strip can be trimmed using the termination marks located every 6 inches, allowing the strip to be sized to the installation. Only one LED strip is recommended per arm.

This product supports breakaway, swingaway, and fixed arm installation methods (compatible with PBG and CBG models), with cable routing guidance provided near the pivot screw for each type. All electrical connections must be made by a qualified individual, and both AC power and battery switches must be turned off before servicing or installation.

• 12' LED strip with red and green lights for added arm visibility
• Compatible with the BGARM12 in the BG24DC barrier gate operator series
• LED strip inserts into the arm channel facing oncoming traffic
• Trimmable using termination marks spaced every 6 inches
• Includes 3 plastic retainer clips (two clips used during installation)
• Supports breakaway, swingaway, and fixed arm installations (PBG and CBG models)
• Connects via a screw-tight mating connector to the arm bracket wire harness