Liftmaster TECHNA- 10' LED CBG Aluminum Arm

The TECHNA 10' LED CBG Aluminum Arm (BGARM10LED) is a modular barrier gate arm assembly that includes an integrated LED strip from LiftMaster. The LED strip features red and green lights that insert into the arm channel to add visibility to the arm. It is designed for use with barrier gate arms in the BG24DC barrier gate operator series.

The LED strip slides into the channel on the desired side of the arm and is held in place with plastic retainer clips and an end cap. It should be installed facing oncoming traffic to maximize visibility. The strip can be trimmed to length using termination marks located every 6 inches, and its connector mates with the arm bracket wire harness for power.

This LED arm is suited for breakaway (recommended for CBG models), swingaway, and fixed arm installations. LED mating connectors are routed and secured near the pivot screw, allowing the connector to safely pull apart during breakaway, while preventing cable tugging during swingaway operation. Only one LED strip is recommended per arm.

• Includes one 10' LED strip with red and green lights
• Includes three plastic retainer clips (two are used during installation)
• Compatible with the BG24DC barrier gate operator series
• Inserts into the arm channel facing oncoming traffic for added visibility
• Trimmable to length using termination marks every 6 inches
• Connector mates with the arm bracket wire harness and screws hand tight
• Supports breakaway, swingaway, and fixed arm installation types